Oase FiltoClear pressure filters have outstanding filtration properties and are very easy to use. The dirty water is pumped into the pressurized system. This pressure enables the outflow from the filter to feed a waterfall for instance, even if it is higher than the filter.
The FiltoClear is pressurised and do not rely on gravity to feed the water back to the pond. They can therefore be situated in the garden below the pond level or in a shed, greenhouse or garage.
A flow indicator on the filters tells you when the filter needs cleaning. They do not have to be taken to pieces to clean. There is a second outlet on the top of the filter for back flushing.
Using the control valve on top, you set it to back flush. The water is then pumped backwards through the filter sponges to clean them out. Also there is a handle on the top that lifts up to squeeze the dirt out of the sponges.
Oase recommends that you replace the filter pads and UV bulbs after 12 months continuous use or when the pads start tp show wear, which ever comes first
Select the size you need below For the FiltoClear Filter you have.